Gangguan Speedy

 Jenis jenis gangguan speedy dan cara mengatasinya

1. gangguan tidak bisa browsing dalam keadaan lampu modem off/mati adsl/link/dsl,,,solusinya:
-Pertama adalah dengan cara setting ulang modem anda,,,(berikut beberapa cara setting ulang modem tergantung modem yg anda pakai)
Spoiler for modem SMC:
Default IP: 192.168.2.1
Default password: smcadmin

Setting Bridge:
* Klik WAN
* Clik ATM PVC
* Klik VCI
* Protocol: 1483 Bridging, VLAN: Default, VPI/VCI: 8/81, Encapsulation: LLC, Qos Class: UBR, PCR/SCR/MBS: 4000/4000/10
* Klik Save Settings

Setting PPPoE:
* Klik WAN
* Clik ATM PVC
* Klik VCI
* Protocol: PPPoE, VPI/VCI: 8/81, Encapsulation: LLC, QoS Class: UBR, PCR/SCR/MBS: 4000/4000/10, IP assigned by ISP: Yes, IP Address: 0.0.0.0, Subnet Mask: 0.0.0.0, Connect Type: Always Connected, Idle Time (Minute): 5, Username: nmrspeedy@telkom.net, Password: (password dari telkom), Confirm Password: , MTU: 1492
* Klik Save Settings

Spoiler for modem zyxel:
Default IP: 192.168.1.1
Default username: admin
Default password: 1234
Setting Bridge
* Pilih Network
* Pilih WAN
* Mode: Bridge, Encapsulation: RFC 1483, Multiplexing: LLC, VPI: 8, VCI: 81, Apply
* Pilih Maintenance
* Pilih Tools
* Restart

Setting PPPoE
* Pilih Network
* Pilih WAN
* Mode: Routing, Encapsulation: PPPoE, Username: ( nmrspeedy@telkom.net), Password: (password speedy), Service Name: Speedy, Multiplexing: LLC, VPI: 8, VCI: 81, IP Address: Obtain an IP Address Automatically, Connection: Nailed-Up Connnection, Apply
* Klik Maintenance
* Klik Tools
* Restart
Spoiler for modem shiro:
Default IP: 192.168.1.1
Default username: admin
Default password: admin
Setting Bridge:
* Klik Advanced
* Klik WAN
* Klik New Connection
* Connection Name: Speedy, Type: Bridge, VPI: 8, VCI: 81, and Submit
* Save Settings
* Restart Router, baca juga fungsi router
Setting PPPoE:
* Pilih Advanced
* Klik WAN
* Klik New Connection
* Connection Name: Speedy, Type: PPPoE, Sharing: Enable, Encapsulation: LLC, Username: nmrspeedy@telkom.net, Password: (password dari telkom), VPI: 8, VCI: 81, and Submit
* Save Settings
* Restart Router

Spoiler for modem aztech:
Default IP: 192.168.1.1
Default username: admin
Default password: admin
Setting Bridge
* Klik Advanced
* Pilih WAN
* Klik New Connection
* Connection Name: Speedy, Type: Bridge, VPI: 8, VCI: 81, and Submit.
* Save Settings
* Restart

Setting PPPoE/Router:
* Klik Advanced
* Pilih WAN
* Klik New Connection
* Connection Name: Speedy, Type: PPPoE, Sharing: Enable, Encapsulation: LLC, Username: nmrspeedy@telkom.net, Password: (password dari telkom), VPI: 8, VCI: 81, and Submit.
* Save Settings
* Restart

2. lampu dsl nyala tapi lampu internet/data mati = tdk dpt IP,,,

-dengan cara setting ulang modem sesuai yg dijelaskan diatas,,,
-jika keadaan masih sama mungkin ada indikasi GAMAS atau kualitas port DSLAM/jaringan anda jelek,,,

3.lampu LAN/ethernet mati, tapi lampu dsl dan internet normal
-kabel LAN/RJ 45 anda rusak,,,

0 Response to "Gangguan Speedy"

Poskan Komentar